FRACTURED MOTORWORKS
  • Home
  • About
  • Gallery
  • Project Blog
  • Contact

Project Blog

An inside look at our current projects

Cross Ram Intake for Tom's '55 Plymouth (update)

8/10/2017

0 Comments

 

The completed Original Cross Ram "Sonoramic" intake installed on Tom's '55 Plymouth. Installation required the fabrication of many impossible to find parts, such as the throttle linkage, intake spacers, and balance tube; and the modification of the valve covers for intake clearance. Installation also required relocating the ignition coil, swapping to a more compact master cylinder, and rather significant modification to the carburetors to maintain a good air/fuel ratio after changing over from a single four barrel. It runs well with this setup, and will only require some light tuning before attending the Goodguys Car Show in Spokane August 18-20th.
View my profile on LinkedIn
0 Comments



Leave a Reply.

    Author

    Owner of Fractured Fabrication, owner, builder, collaborator on, or painter of all projects pictured,
    ​Josh McCarron

    Archives

    January 2019
    December 2018
    February 2018
    August 2017
    March 2017
    February 2017
    January 2017
    April 2016
    March 2016

    Categories

    All

    RSS Feed

Telephone

509-723-7066

Email                                          

Fracturedfab@gmail.com                        
  • Home
  • About
  • Gallery
  • Project Blog
  • Contact